diamond

Grey / White Adhesive For Interior Floor Tile

Union Bond T-201 Diamond

Product Description

UNIONBOND DIAMOND T-201 is a grey/white, cement-based high polymer fortified thick/thin set tile adhesive, designed for installing tiles on floor/wall surface in interior location. Excellent adhesion for fixing ceramic, porcelain, mosaics and vitrified tiles using thin or thick bed trowel on existing terrazzo & cement floors.

FEATURES & BENEFITS

  • Polymer fortified adhesive
  • Easy to mix & easy to apply
  • Needs no curing and soaking of tiles
  • Increases productivity and saves time
  • High bond strength & slip resistance
  • No need to remove existing cement/ terrazzo Floors.

COVERAGE

Shall depend primarily on the nature & flatness of the surface to be tiled and the method of application. However on a level background approximately 3.5 kg/m2 adhesive shall be required at 3mm bed thickness using thick/thin bed trowel.

Product Specification

Bed Thickness 3-6mm
Color Grey / White
Walls Use Thin Bed Trowel
Floors Use Thin Bed Trowel
Mixing Ratio (Part by wt.) 1:4 (approx.5.5 ltrs of waterfor 20kg)
Plot Life @ 27° C± 2°C 2-2.5 Hours
Setting Time 24 Hours
Open Time 20-25 minutes
Adjustability 20-25 minutes
FoolTraffic After 24 hours
Tensile Adhesion 20 Days-0.7N/MM²
Shear Adhesion 27 Days-1.2N/MM²
Grouting After 8hrs. for wall and 24hrs. for floor.

INTRODUCTION

UNIONBOND tile adhesives are cement based special polymer modified quick set adhesive for all types of tiles and stone application in interior and exterior locations.

SURFACE PREPARATION

  • All Substratum must be structurally sound, dry, solid and stable. The substances must be clean and free of dust, dirt, oil, grease, paint, curing compounds, concrete, sealer, loosely bonded topping, old adhesive residues and any other substances that may prevent or reduce adhesion. If the substratum contains these substances they must be mechanically removed.
  • All Substances must be plumb and flat to tolerance in a plane.
  • Imperfections and irregular (holes, voids, cracks, depression etc) must be corrected & surface must
    be smooth before the application of adhesive otherwise it reduces the coverage.

PRECAUTIONS

Care should be taken to avoid dust inhalation while mixing and handling powder in case of contact with eyes or mouth, wash with plenty of water. Keep out of reach of children. Store in cool and dry place.

2